|
|
 |
F.A.Q |
|
| |
Farmry-truck Frequently Asked Questions
Questions we are frequently asked are listed below, if you have any other questions about the farmry-truck power barrow range or farmry-truck accessories, please contact us and we will be happy to help you.
A1.How easy is it to steer a loaded Powerdrive Farmry-truck?
Just ease the handles off the ground and the weight distribution does the rest. It is as easy to steer fully loaded as it is to steer when it's empty.
A2.How do I tip a loaded Farmry-truck?
Release the skiplock lever with the right hand and slightly raise both handles. The skip will pivot and dump the load.
A3.When tipped, does the front of a loaded Farmry-truck hit the ground?
No. The skip tips over the centre so there's a good clearance for your load to tip cleanly out of the skip.
A4.How much will a 6 cu ft skip carry?
2½ barrow loads, ¼ tonne (250kg) sand or cement etc, 120 loose bricks, 25 x 1m rolls of turf.
A5.Can I tip into the skip with my standard sized cement mixer?
Yes provided it is fitted onto a frame.
A6.How easy is it to maintain?
The transmission is a sealed unit and requires no attention other than periodic brake adjustment. All engine adjustments, including replacing the air filter and spark plug, are readily accessible without removing covers. To change the drive belt takes less than 5 minutes with no specialist tools required.
A7.How quickly can attachments be fitted?
In seconds. Just remove one lynch pin, slide attachment off/on two locator brackets, (one is longer to make things really easy), and replace the pin. No tools required.
A8.What gradient will a fully loaded Farmry-truck climb?
Fitted with powerdrive, up to 30 °. |
| |
|
|
